China (Mainland)
- Product Details
Keywords
- silicone fluid
- linear
- Silicone oil
Quick Details
- ProName: SILICONE FLUID ATPN-1000
- Application: minimal change in physical properties ...
- PackAge: 25Kg/drum
- ProductionCapacity: Metric Ton/Day
- Purity: 99%
- Transportation: by sea/by air
- LimitNum: 500 Kilogram
Superiority
minimal change in physical properties over a broad temperature range
excellent water-repellent properties
good dielectric properties
low surface tension and thus high surface activity
chemically highly unreactive
low solidifying point
high flash point
high heat resistance
good solubility in a wide range of solvents
Details
Introduction
It is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm²/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils.
Specifications
| Typical general characteristics | Value |
| Appearance | colorless, clear |
| Viscosity, kinematic at 25°C | approx. 1000 mm²/s |
| Density at 25°C | approx. 0,97 g/cm³ |
| Refractive index at 25°C | 1,404 |
| Flash point | > 300 °C |
| Surface tension at 25°C | 0,021 N/m |
| Ignition temperature (liquids) | 410 °C |
| Viscosity, dynamic at 25°C | 1000 mPa.s |
Special features
minimal change in physical properties over a broad temperature range
excellent water-repellent properties
good dielectric properties
low surface tension and thus high surface activity
chemically highly unreactive
low solidifying point
high flash point
high heat resistance
good solubility in a wide range of solvents
Application
release agent
lubricant
hydraulic fluid
antifoam agent
water-repellent agent
liquid dielectric for electrical and electronic equipment
heat-transfer oil
polish additive
plastics additive
additive for textile and fiber auxiliaries
Storage
Maximum temperature allowed during storage and transportation: 50 °C
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.